It is our aspiration and motivation to design proactively new products which will be essential in the future.
For this reason, we have been developing, producing and marketing mechanical and mechatronic locking, hinging and connection solutions for industrial enclosure construction in a purposeful and future-oriented manner for more than 25 years. Together, the right solution is also created for your specific application.
7-071 Compression Latch
6-046 Grounding Cage Nut □9.5
6-212 Indexing plunger with rest position
Unique optical control ensures safety
-Locking status clearly visible from a distance due to open flap
-Clear locking indication: Flap closes in locked position
-6 mm compression
Can be mounted without tools from the front or from the back: The new cage nut for comfortable use
Simply versatile. Simply practical.
-Indexing plunger with spring-loaded handle and rest position
-Enables fixing of covers and flaps in defined positions
-The spring-loaded handle is fixed by pulling and then turning it to 90°
-Installed using a simple push in the cutout
Productpage
Product-LAUNCH
4-251 Hinge Pr01 180°
5-100 Four Lips Channel Sealing Profile EPDM
3-400 Swinghandle base
Securely connected and well thought out design
Hinge with fastening bracket ensures a precise fit in the rectangular cutout and allows for easy installation using only one screw. Additionally, the seals on the hinge provide protection against the ingress of water and dust.
-The double symmetry prevents incorrect fitting
-Tool-less installation by simply pressing into the channel
for secure locking, quick installation and variable use
-The lifting spring opens the handle after unlocking and visualises clearly the locking position
-Folding protection avoids damages of the dish and the enclosure
-Secure closing with slam latch
-Tool-less replacement of the cylinder cover in open position possible
Productpage
4-155 Hinge Pr05 180°
6-502 Compression Latch PHZ with Lock Cover
7-077.02 Height adjustement with knurled wheel and catch from stainless steel
The new hinge simplifies the lift-off of doors due to the comfortable handling.
The captivity of the pin leads to a secure use of the hinge.
Common hole centre distance allows easy replacement in existing applications.
The compression latch with profile half cylinder is excellently suited for applications in publicly accessible areas and combines easy operation with security and design.
For tool-less (re-) adjustment of the cam.
7-077.02: Version with catch from stainless steel.
Productpage
1-351 Rod Latch for Quarter-Turns with round or flat rods outside of the sealed area
6-1110DST DST Bowed Handle with Quarter-Turn
Simple. Secure.
For a complete locking system
-Flexible: Rod Latch can be used for all standard Quarter-Turns with 18 mm housing
-User- friendly: Allows multi-point locking
-Comfortable: Dual rod connection allows quick installation and easy mounting of flat rods and dual rollers
-Conductive: Grounding with additional grounding nut possible
Productpage
Product-LAUNCH
-Bowed handle with DIRAK-SNAP-Technology and Quarter-turn, with cylinder or for insert
-Tool-less, vibration-proof installation also in closed profiles
-Rectangular cutout guarantees a perfect alignment
-Handle can be used for RH/LH, horizontal and vertical applications
DIRAK-SNAP-Technology
In a world full of connections, we have developed a pioneering technology. With DIRAK-SNAP-Technology (DST) you can create high-strength connections easily, without the use of any tools – so that you can create the perfect solution, simply and securely.
1-162 Flush Latch with Integrated Hinge Function
6-111 Slam Latch for Profile-Cylinder
7-081.04HD Hygiene Compression Latch Pr20.1 SW13
- For surface mounted doors.
- Hinge concealed.
- Door bending 23 mm.
- RH and LH Version.
- 120° Opening angle.
- Vibration-proof according to DIN EN 61373.
- Flush latch through insert.
- When using 4 latches, the door can be lifted off completely.
- RH / LH or vertical / horizontal application.
- Depending on application, key is always in the correct position.
- Profile-cylinder with lengths of 40 and 45mm and cam acc. to DIN 18252 can be used.
- Pull back of the latch bolt by rotation of the key.
- Closing with slam-lock.
- Closing in locked position possible due to free stroke.
Productpage
-Compression 4 mm.
-Vibration-proof according to DIN EN 61373.
-The complete Quarter-Turn is certified and tested according to: GS-NV 2:2013/06 Principles for the testing of food processing machines GS-NV 6:2013/06 Principles for the testing of hygiene requirements. Machine Ordinance: DIN EN 1672-2:2009.
-DGUV Test Certificate.
-RH and LH version.
-IP 65/67/69K according to DIN EN 60529 / DIN 40050.
Productpage
1-110.01 Quarter-Turn with Flat Head
-Flat quarter-turn for cutout Pr20.1.
-RH / LH application.
-IP65/67 according to DIN EN 60529 by sealing kit. (optional).
-Please configure the quarter-turn with insert (adapter) and cam.
-On request parts can be assembled.
-The quarter-turn can be screwed into the cutout with the pre-assembled cam.
Productpage
You can unsubscribe to our newsletters at any time.
We consider your information to be private and will only use it for the reason provided; it will not distributed/forwarded to third parties.
Should you have any further questions, please do not hesitate to contact us at any time.
