A Connection to Ensure Potential Equalization

Product innovations, News

We previously informed you about the new DIRAK Grounding Countersunk Screws at the time of the Launch on 01/22.

To be able to meet the requirements for continuous potential equalization between the door-part and frame-part when needed, we have added the metric thread cutting Grounding Countersunk Screw M6x12 to a selection of DIRAK hinges.
 

The benefits:
the VDE-certified Grounding Countersunk Screw developed by DIRAK is fitted with a segment cutting edge and scraping tooth under the head. This unique advancement ensures an electrically conductive connection between the door-part and frame-part, even for painted or coated hinges. We have also added an additional pin with axial knurl and a contact spring to the hinges. This development also ensures a reliable connection between the two hinge halves.
 

The advantages:

  • No additional steps like plugging a hole or subsequently removing paint from the through bore of the hinge.
  • Thanks to this chip less grooving there is no need to remove chips, cut the thread or use any additional nuts.
  • Simplified installation saves time and money.





New 
Hinge 50x50 Pr01 180° with Grounding Countersunk Screw





New
Hinge 76x50 Pr01 180° with Grounding Countersunk Screw





New
Hinge 63x50 Pr01 180° with Grounding Countersunk Screw





New
Hinge 76x60 Pr01 180° with Grounding Countersunk Screw

DIRAK Magazine 1/2022 is available

DIRAK Magazine 1/2022 is available

We are pleased to give you an inside view of the DIRAK world and let you know what issues we have...

News
A Connection to Ensure Potential Equalization

A Connection to Ensure Potential Equalization

We previously informed you about the new DIRAK Grounding Countersunk Screws at the time of the...

Product innovations, News
DIRAK supports the commitment of the EN Baskets Schwelm in "Donations for Ukraine"

DIRAK supports the commitment of the EN Baskets Schwelm in "Donations for Ukraine"

At the last EN Baskets home game on 03/12/2022, donations were collected for the fundraising...

News
The DIRAK M6x12 Grounding Countersunk Screws with Segment Cutting Edge and Scraping Tooth

The DIRAK M6x12 Grounding Countersunk Screws with Segment Cutting Edge and Scraping Tooth

A Conductive Connection The main purpose of potential equalization is as a protective measure...

Product innovations, News
An exciting solution

An exciting solution

Over center toggle latches are used in many different applications. For example, if a transport...

Product innovations, Product
DIRAK: Karl-Heinz Overhamm to Retire

DIRAK: Karl-Heinz Overhamm to Retire

After 17 years, Karl-Heinz Overhamm is handing over management of the DIRAK Group to Florian...

Press area, News
We have something to protect against vandalism for outdoor use

We have something to protect against vandalism for outdoor use

A secure and reliable internet connection is indispensable. If the internet is not running as...

News
The first DIRAK Magazine has been published

The first DIRAK Magazine has been published

Our magazine, which will appear regularly, will not only present new products, but also and to a...

News
Immerse yourself in the world of DIRAK GmbH

Immerse yourself in the world of DIRAK GmbH

The time has finally come again. We look forward to welcoming you in hall 4, stand 4512 from 10/26...

Trade fair
DIRAK supports the EN Baskets Schwelm

DIRAK supports the EN Baskets Schwelm

DIRAK and the EN Baskets Schwelm seal joint partnership / DIRAK and the EN Baskets Schwelm will be...

Press area, News
DST: Assembly in just seconds at Haromac

DST: Assembly in just seconds at Haromac

Can a complete workbench be assembled in just 25 minutes? A case study with the Haromac tool...

News
So that old love will not rust: DIRAK supports the Oevelgönne Harbor Museum e.v. (Hamburg)

So that old love will not rust: DIRAK supports the Oevelgönne Harbor Museum e.v. (Hamburg)

With a donation for replacing the switch cabinets, we made it possible for the Oevelgönne Harbor...

News
We are pleased to present: Florian Birkenmayer

We are pleased to present: Florian Birkenmayer

We have made an addition to our company management. Our Managing Director Karl-Heinz Overhamm, who...

Press area, News
Save more storage capacity thanks to leveling foot

Save more storage capacity thanks to leveling foot

Have you heard about the highlight of our new leveling foot? Our product manager Mario Sauerbier...

Product, News
Update: Stainless Steel Flush-mounted Compression Latches now also dust- and waterproof

Update: Stainless Steel Flush-mounted Compression Latches now also dust- and waterproof

The stainless steel compression latches from the product systems listed below not only offer a...

Product innovations, Product
Maximum Options for Creating Balance: the New DIRAK Leveling Foot

Maximum Options for Creating Balance: the New DIRAK Leveling Foot

An uneven floor can become a challenge, for example when attempting to set up machines or furniture...

Product innovations, Product
The Pressure-Tight System with 90° Redirect simply explained

The Pressure-Tight System with 90° Redirect simply explained

Our senior product trainer Georg Hübner introduces you to the safe latching system Pressure-Tight...

Product, News
A Project for Safety

A Project for Safety

The customer's request to develop a new RCII handle similar to the existing product systems 2-102...

Product innovations, Product
An easy solution

An easy solution

Today we are pleased to present a new visible hinge for nested doors.The new hinge, based on the 3D...

Product innovations, Product
Flat Swinghandle in the new Traverso

Flat Swinghandle in the new Traverso

Space is usually at a premium on trains. Special solutions are often needed to ensure that cabinets...

Press area

This website uses cookies, which are Serve to facilitate the provision of our services. More information on data protection